Screw Vibrating Feeder Machine
Screw vibrating feeder is a steady flow of powder material conveying, weighing and quantitative measurement of control as one of the new generation of products; for a variety of industrial production of powder materials and the continuous measurement of ingredients; using a number of advanced technology, running reliable, high precision control; especially for and building materials, metallurgy, electric power, chemical industry continuous measurement of powder materials and ingredients.
Automatic Screw Feeder Machine
Screw vibrating feeder to the material after testing by weighing the weight of the bridge to determine the weight of the material on the tape, mounted on the rear of the digital speed sensor, continuous measurement of the speed of the feeder, the speed sensor pulse output proportional to the feeder speed, speed and weight of the signal with the signal to feed into the machine controller, the controller for processing the microprocessor to generate and display the total volume / flow rate.
The traffic flow compared with the set, the output signal from the control instrument to change the feeder to control the drive speed of the drive, so that the feeder on the material flow changes, and keep the set close to the feed flow rate, in order to achieve quantitative feed requirements.
Screw Feeder Equipment
1, feeder, such as for ingredients, dosing, in order to ensure uniformity and stability to the material, the level should be installed to prevent gravity flow of materials, such as for general continuous feed material can be installed under the 10 ° tilt. For viscous materials, materials and water content of greater declination 15 ° can be installed.
2, installation of feeder space should be left 20mm swimming, cross should be the level of suspension with flexible connections. 3, before the air test, all bolts should be strong again, especially the electromagnetic vibration of anchor bolts, 3-5 hours of continuous operation, should be re-tightened once.
4, the test, the two vibrating motors have to rotate.
5, when the feed during the operation should always check the amplitude of the current and noise stability, abnormal processing should stop in time.
6, magnetic bearings once every 2 months, oil filling, heat oil once a season should have a monthly raise.
Screw Vibrating Feeder Manufacturers In India
The Ciros screw vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.
- disc feeder equipment
- vibrating feeder machine
- electromagnetic vibrating feeders manufacturer india
- round vibrating screen machine manufacturers india
- apron vibrating feeder
- linear vibrating screen machines
- ultrasonic vibrating screen machine
- high frequency vibration screen
- cement tube mill machine
- cement pressure conveyor equipment